Description
A 3 hp magnetic drive pump refers to a type of industrial pump that utilizes magnetic coupling to transfer power from the motor to the pump impeller without a direct mechanical connection. Magnetic drive centrifugal pump adaptable to IEC standard motor. This type of pump is suitable forchemical industry and metal industry.
Features:
- ETFE (carbon-fiber reinforced) wetted-end material.
- Able to handle many types of chemical and temperature up to 90 ℃.
- Available in flange connections.
Specification:
| Model | ATO-353PW-F | |
| Specific Gravity | 1.2 | |
| Frequency | 50Hz, 60Hz | |
| Rated Voltage | 3-phase 380V (please contact us for other voltages) | |
| Pump performance at specific point (M-L/min) | 50Hz | 24-150 |
| 60Hz | 32-120 | |
| Motor Output | 3 HP (2.2 kW) | |
| Flange Size | 32 mm (outlet); 32 mm (inlet) | |
| Casing Material | ETFE | |
| Shaft Material | ceramic | |
| Bearing Material | carbon | |
| O-ring Material | FKM | |
| Interface Mode | thread, flange | |
| Net Weight | 46kg |
Structure:
Dimension (Unit: mm)
| Model | W | H | L | a | b | c | d | e | f |
| 352PW-F | 160 | 242 | 505.5 | 222.5 | 132 | 155 | 130 | 120 | 78 |
Tips: How to Prime a Magnetic Drive Pump?
- Ensure the magnetic drive pump is turned off and disconnected from the power source.
- Open the suction valve on the inlet side of the pump.
- Pour liquid into the inlet until the pump is filled.
- Close the suction valve.
- Turn on the pump and let it run for a few seconds to ensure that it is working properly.
It is important to never run a magnetic drive pump dry as this can cause damage to the pump. Always ensure that the pump is primed with the appropriate fluid before turning it on.
Reviews
There are no reviews yet.