Sale!
ato202607172028461859855

PLC Motion Controller, 3-Axis/4-Axis

Original price was: £926.15.Current price is: £185.23.

🚚 Free delivery over £60!

⚡ Fast dispatch

🔒 Secure Payment

⭐ Reliable quality

💬 Helpful customer service

📦 Fast delivery available across the whole country

SKU: ATO-PLC-PM Category:

Description

PLC Programmable Logic Controller DVP-PM series is available with DVP10PM00M standard motion controller for general applications and ATO-DVP20PM00D/M advanced motion controllers which are not only excellent motion controllers, but also can be used as motion extension modules and support advanced motion control functions, more flexible in all kinds of applications.

Specification

Model ATO-DVP10PM00M ATO-DVP20PM00D/ DVP20PM00M
MPU Points Built-in 24 I/O, max. 256 I/O point Built-in 16 I/O, max. 256 I/O point
Program Capacity 64k steps 64k steps
Data Register 10k words 10k words
Features
  • Excellent execution speed LD: 0.13 μs, MOV: 2.1 μs
  • 4 axes linear interpolation motion control
  • High accuracy PWM 200 kHz output, resolution 0.3%
  • 8 groups of high-speed captures (mark correction, frequency measurement), comparative output, Mark / Mask function (for bag making)
  • Built-in RS-232 and RS-485 ports, and supports standard Modbus ASCII / RTU protocol
  • Compatible with G-code / M-Code
  • 3-axis linear / arc / helical interpolation
  • Supports electronic cam (2,048 points) function for flying shear and rotary cut applications
  • All models can be applied as motion controllers or extension modules
  • Built-in RS-232 and RS-485 ports, and supports standard Modbus ASCII/RTU protocol
Motion Control Functions
  • High-speed pulse output: built-in 6 sets of A / B phase pulse outputs
  • 2 sets of 200 kHz output, 4 sets of 1 MHz output
  • 6 sets of high-speed counters and hardware digital filter for counting
  • Supports MPG inputs
  • Single-axis motion control function (supports MPG, single-speed and two-speed positioning)
  • Electronic gear function
  • Built-in A / B phase differential signal outputs: 2 sets (DVP20PM00D) / 3 sets (DVP20PM00M) max. differential output frequency 500 kHz
  • Supports MPG inputs
  • Single-axis motion control function (supports MPG, single-speed and two-speed positioning)
  • Electronic gear function
Function Card (Optional) DVP-FPMC Ethernet/CANopen communication card:

  • Complies with CANopen CiA301 V4.0.2 protocol.
  • Provides high-speed program upload/download via Ethernet.
Electrical
Power Supply 100 ~ 240V AC (-15% ~ +10%), 50/60Hz ±5%
Fuse Capacity 2A / 250V AC
Power Consumption 60VA
DC 24V Current Output 500mA
Power Protection DC 24V output short circuit protection
Voltage Withstand 1500VAC (Primary-secondary), 1500VAC (Primary-PE), 500VAC (Secondary-PE)
Insulation Resistance >5MΩ at 500VDC (between all I/O points and ground)
Noise Immunity ESD: 8kV Air Discharge
EFT: Power Line: 2kV, Digital I/O: 1kV, Analog & Communication I/O: 250V
Grounding The diameter of grounding wire shall not be less than that of L, N terminal of the power supply.
(When many PLCs are in use at the same time, please make sure every PLC is properly grounded.)
Environment Operation: 0°C~55°C (temperature), 5~95% (humidity), pollution degree 2
Storage: -25°C~70°C (temperature), 5~95% (humidity)
Vibration/Shock Immunity International standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/ IEC61131-2 & IEC 68-2-27 (TEST Ea)
Weight 612g 696g
Documents (Please refer to the below PDF for more details)
Instruction Sheet DVP10PM00M Instruction Sheet DVP20PM00D/M Instruction Sheet

Dimensions (Unit: mm)

Model H H1 W W1 W2
DVP10PM00M 90 80 143.5 133.5 82
DVP20PM00D 90 80 174 164 82
DVP20PM00M 90 80 174 164 82

Reviews

There are no reviews yet.

Be the first to review “PLC Motion Controller, 3-Axis/4-Axis”

Your email address will not be published. Required fields are marked *

Related products