Description
A cost-effective digital oscilloscope with 100 MHz bandwidth, 500 MSa/s sample rate, 2 channels. The digital oscilloscope built-in multimeter which is very convenient for the job and the oscilloscope is much lighter, easier, and perfect for field use. Practical and intuitive menu page layout, the 100 MHz oscilloscope is intuitive and handy in its use
Specification
Performance Characteristics
| Model | ATO-HDS2102 |
| Bandwidth | 100MHz |
| Channel | 2 channel |
| Sample rate | 500MSa/s |
| Acquisition model | Sample, Peak detect |
| Record length | 6K |
| Display | 3.5 inch LCD |
| Waveform refresh rate | 10000 wfrms/s |
| Input coupling | DC, AC, Ground |
| Input impedance | 1 MΩ±2%, in parallel with 16 pF±10 pF |
| Probe attenuation | 1X,10X,100X,1000X |
| Max. input voltage | 400V (DC+AC, PK – PK) |
| Bandwidth limit(typical) | 20MHz / Full bandwidth |
| Sampling rate range |
2ns/div – 1000s/div, step by 1- 2- 5 |
| Sensitivity Resolution | 10mV/div~10V/div |
| Low Frequency（-3db） | ≥10 Hz (at input, AC coupling) |
| Rise time (at input, Typical) | ≤8ns |
| Trigger type | Edge |
| Trigger model | Auto, Normal, single |
| Trigger level range | ±4 div from the screen center |
| Automatic measurement | Period, Frequency, Mean, PK-PK, Max, Min |
| Cursor measurement | ΔV, ΔT, ΔT&ΔV between cursors,auto cursor |
| Communication interface | USB Type-C |
Digital Multimeter Specification
| Full-scale reading | 4.5 digitals (max 20000 count) |
| Testing Modes |
Voltage, Current, Resistance, Capacitance, Diode, Continuity |
| Maximum Input Voltage | AC 750V, DC 1000V |
| Maximum Input Current | DC: 10A, AC: 10A |
| Diodes Test | 0-2V |
Accessories
- Quick Guide
- USB Cable
- Probe
- Probe Adjust
- Multimeter
- Lead
- BNC plug to alligator clips cable
- Soft Bag
Dimension (mm)
Details
Tips: What is a handheld oscilloscope?
A handheld oscilloscope is a handheld electronic measuring instrument used to display the instantaneous value of the measured trajectory changes, with convenient portability, easy operation, and other characteristics. It can transform invisible electrical signals into visible images, which is convenient for people to study the change process of various electrical phenomena. It uses a narrow, high-speed electron beam composed of electrons, hitting the screen surface coated with fluorescent substances, it can produce a fine point of light. Under the action of the measured signal, the electron beam is like a pen’s tip, and the measured signal’s instantaneous value can be depicted on the screen surface of the change curve. Using the oscilloscope can observe a variety of different signal amplitude changes with a time waveform curve, but also can use it to test a variety of different power, such as voltage, current, frequency, phase difference, amplitude modulation, and so on.
Reviews
There are no reviews yet.