Description

4 position 4 way electronic DIP switch is a dual in-line package switch that can be mounted directly on a circuit board to activate or deactivate different electronic circuits.

Specification

Model	ATO-DIP-4P
Spacing	2.54mm
Number of Switch	4
Number of Pin	8
Maximum Operating Force	8N
Push Button Stroke	2mm
Operating Temperature	-20℃~+70℃
Storage Temperature	-40℃~+85℃
Contact Resistance	Initial Value: 50MΩ, After Test: 100MΩ
Insulation Resistance	100MΩ, 500VDC
Compressive Strength	500VAC/1min
Interpolar Capacitance	5pF
Loop	SPST (Single Pole Single Throw)
Electrical Life	Tested under voltage 24V DC and current 25mA, it can be dialed back and forth about 2000 times
Rated Current	Does not Switch Frequently	10mA, Withstand Voltage 50V DC
Switch Frequently	25mA, Withstand Voltage 24V DC
Weight	0.1kg

Dimensions (Unit: mm)

Tips: DIP switch for PLC control system

DIP switches are widely used in data processing, communication, remote control and anti-theft automatic alarm systems, air showers and other products that require manual programming. If some data in the PLC control system needs to be modified frequently, you can use a multi-position DIP switch to connect to the PLC and set the data outside the PLC. In the figure, the COM terminal of the 4 position DIP switch is connected together with the COM terminal of the PLC. The 4 data lines of each DIP switch are connected to the 4 input points of the PLC in a certain order.